LLC “KHIMPOGLOTITEL” was founded in 2005 in Kemerovo and since then, has become a major producer of GOST 6755-88 CO2 lime absorbent (KhP-I) on the territory of the Russian Federation.
CO2 lime absorbent is meant for the CO2 chemical defense equipment in the regenerative respirator system (RBA): respirators R-30; R-34; OVA-6; Kuzbass-4, and similar individual respiratory protective equipment.
A modern technology which uses natural gas is applied to produce chemical lime CO2 from high-quality raw materials – low-magnesium lime and sodium hydroxide. The product has a GOST R certificate of conformity.
CO2 lime absorbent is supplied to the Paramilitary Mine Rescue Divisions and Fire Departments of the Emergencies Ministry of Russia, as well as to additional rescue services at coal mines, open-pits, and quarries, for economic and export needs (Kazakhstan, Ukraine, Belarus, Kyrgyzstan).
Properties of GOST 6755-88 co2 lime absorbent (KhP-I)
1
Appearance
Granular product of white
or light gray colour
2
Slip volume fraction of CO2 in the air at the outlet from the cartridge, %, max: in the first 40 minutes of
determination 120 minutes after the beginning of determination
0,1
0,5
3
Maximum resistance during the determination of the slip volume fraction of
carbon dioxide, Pa (mm w.g.), max
147(15,0)
4
Maximum air temperature at the outlet of the cartridge during the determination of the slip volume
fraction of carbon dioxide, °C, max
50,0
5
Abrasive wear resistance, %, min
65,0
6
Fraction content, %
Grain size by fractions, mm:
from 5.50 to 6.50, max
from 2.80 to 5.50, min
from 1.00 to 2.80, max
less than 1.00 (dust), max
5,0
90,0
5,0
0,6
7
Moisture content, %
16,0-21,0
8
Bound carbon dioxide mass fraction, %, max
4,0
safety
safety
Has a typical
limy smell
Fire - and
explosion-safe
Quality control is carried out by an accredited independent testing centre.
Absorbent (net weight – 40 kg) is packaged in polyethylene liner bags placed in 700х320-mm, 3.5-kg steel drums.
SHIPpING DATA ARE PLACED ON THE SIDE OF THE STEEL DRUM.
Absorbent is stored indoors.
Stored at a temperature below 0°C, absorbent (KhP-I) should be kept at a temperature not lower than 20°C for a day before it is used.
DELIVERY
Absorbent (CO2) is shipped by all types of transport, except water transport, in closed vehicles according to the carriage rules applied to a specific transport type.
Absorbent (CO2) warranty
storage period
FROM THE DATE OF PRODUCTION
